An Introduction to the Common Data Format Project

This page presents an introduction to the common data format (CDF) project and answers the question, why is a CDF needed? It starts with a discussion of the proprietary nature of current election equipment data formats and the resultant problems this creates, and then discusses the advantages to using a common data format and how this improves efficiency, reduces cost, and increases the overall transparency of election equipment and, ultimately, elections.

Why is a CDF Needed for Election Equipment?

Advantages to Using a CDF

Why the Need for a CDF for Election Equipment

The need for a common data format is analogous to the use of a common language for people and economies to share the best of ideas, products, and services. A language used exclusively by a few isolates people from the rest of what the world has to offer. As the demand and use of technology increases in elections, a variety of new products are being used by election officials that must be able to “talk” with each other (i.e. share data) or talk with a common host in order to integrate them into the entire election administration process. Since the "data language" used by these products tends to be proprietary and doesn’t communicate with products from another manufacturer, election officials can be limited to the voting systems product line available through the manufacturer they already have a relationship with.

In the elections marketplace, this has several disadvantages:

  • Election officials can be "locked" into a single manufacturer’s product line by decisions made years ago in their jurisdiction when the needs were different. The cost of converting the jurisdiction’s entire product line to another manufacturer and the top to bottom change in procedures often required could be prohibitive.
  • Election officials may not have an opportunity to shop for the more appropriate product to meet their needs if they are limited to using only the products offered by their current manufacturer.
  • Smaller companies that might focus on a single product can be locked out because of the lack of interoperability with manufacturer product lines.
  • The addition of newer devices such as online blank ballot distribution or tablet technology is complicated by projects having to define its own data format or use a format that is proprietary to an existing manufacturer.

Without a CDF, duplication of effort, greater risk of getting things wrong, and re-invention of the wheel can occur. Several examples suffice:

Example 1:
A jurisdiction’s voter registration system and candidate filing system may both contain the information needed by its ballot layout system when it comes time to create a new election. These are actually "families" of equipment, and due to a lack of a CDF between the two families, jurisdictions that import/export information between them have commonly had to expend their own resources to create a sort of "translation service" between the two that is unique to that jurisdiction’s situation. Or, some jurisdictions may have to duplicate their data entry by re-creating the information in the ballot layout system more or less manually. Obviously, a CDF between these families of equipment would largely eliminate this duplication of effort and reduce the potential for mistakes.

Example 2:
During an election, the vote-capture devices such as DREs, POS, and CCOS (Direct-Record Electronic, Precinct Optical Scanner, and Central-Count Optical Scanner respectively) communicate the votes they gather to a common EMS (Election Management System) where the votes are tabulated and reported. Prior to its use in the election, a common EMS communicates a complex set of ballot configurations to these devices that define the ballot styles of each vote the device will be used to gather. Typically the EMS that creates the ballot styles and communicates the ballot styles to the devices is the same system that receives the votes gathered by the devices. Without a common data format and given that the communication protocol, data structure, and data elements are unique to each manufacturer, the DRE, POS, and CCOS in a jurisdiction will generally be products developed, marketed, and/or integrated by the same manufacturer who created the EMS. If a jurisdiction wants to use a different DRE, or POS, or CCOS than the one provided by its manufacturer, it may be very costly to integrate the product. The same issue occurs with EMSs; a state must use the same manufacturer throughout the state or else must import/export tabulated results to intermediate formats.

Example 3:
A number of states, motivated by the MOVE (Military and Overseas Voter Empowerment) Act's requirements and the need to deliver blank ballots to voters located overseas in ample time for the election, are now fielding blank ballot distribution systems (BBDS) to allow voters to download their respective ballots; some states are also experimenting with using tablets (e.g., the iPad) to assist in blank ballot delivery. These technologies each need to "speak" to other parts of the voting system, for example the BBDS needs to access ballot information stored in the EMS and voter/precinct information stored in the VRDB (Voter Registration Database). However, without a common data format, the data format either needs to be invented for that particular project, or the data format will be the same proprietary format as one of the manufacturer partners, e.g., for example, the data format used by the EMS. This typically requires a business arrangement between the project developer and the owner of the proprietary format.

Advantages to Using a CDF

There are numerous advantages to using a common data format in election equipment and associated software and systems. Perhaps the best answer is because it makes the devices easier to use, deploy, and understand. Ultimately, it can make them less complex to administer and understand, and the resultant reduced complexity may then lead to greater trust of the voting devices. Thus, a CDF is foundational in a number of ways for improving current voting systems and for making it possible to develop new voting technologies in an efficient, orderly way. It follows from the previous discussion that use of a CDF brings the following advantages:

  • Anyone can build or sell a device; no manufacturer gets locked out of the market.
    Support of a CDF in manufacturer equipment results in interoperability of data format and permits new manufacturers to sell equipment to states or jurisdictions where they were formerly locked out. It allows small manufacturers to build one-off devices as opposed to having to build a complete suite of products.

  • Election officials are empowered to buy whatever devices best suit their needs.
    When there is interoperability, election officials can then shop for the devices that best suit the needs of the voters, regardless of manufacturer. If, for example, a particular accessible voting device is deemed better for a particular state, election officials can now use this system regardless of who has manufactured it.

  • Software and new system developers can write applications that make use of the CDF.
    The CDF specifications are freely available, and developers/integrators of new equipment and software can use them to interface to other manufacturer equipment. This prevents the continual "re-invention of the wheel" that occurs when new systems must develop their own format.

  • Elections can be audited and analyzed and archived more easily.
    Voting devices store a number of data elements that are important and useful for election audit and analysis, but these items are sometimes not easily accessible due to their proprietary formats, e.g., event logs. When a CDF export format is provided for a class of voting devices, manufacturers can then build in the export capability for these elements. In other words, "Build it and they will come."

  • Device certification is possible.
    The EAC certifies voting systems, that is, complete systems of devices to run an election. Certifications can be as expensive as $2 to $4 million and may take several years. If a state wishes to use a new device in a certified voting system, it may "break" the certification because of the resultant changes that would need to occur in order to make the new device operate with the other devices in the system. With interoperability, however, a device itself could be certified and used in an existing voting system without breaking the certification.

  • Voting equipment testing is easier with common formats and imports/exports.
    When devices have a common import/export format capability, tests can be made more uniform and devices can more easily be tested against common collections of data. Outputs from devices can be analyzed with more consistency.

-- John Wack - 2017-07-21


This topic: Voting > WebHome > ConstituencyGroups > Interoperability > WhyIsACDFNeeded
Topic revision: r2 - 2017-07-22 - JohnWack
This site is powered by the TWiki collaboration platform Powered by PerlPLEASE NOTE: This wiki is a collaborative website. NIST does not necessarily endorse the views expressed, or concur with the facts presented on these sites. Further, NIST does not endorse any commercial products that may be mentioned on these sites. All the material on this website is in the public domain, including any text, diagrams, or images, unless indicated explicitly. Don't share anything on this site that you do not want to be public. Do not pass any proprietary documents or put any on the TWiki with implied public disclosure. If you do, it shall be deemed to have been disclosed on a non-confidential basis, without any restrictions on use by anyone, except that no valid copyright or patent right shall be deemed to have been waived by such disclosure. Certain commercial equipment, instruments, materials, systems, software, and trade names may be identified throughout this site in order to specify or identify technologies adequately. Such identification is not intended to imply recommendation or endorsement by NIST, nor is it intended to imply that the systems or products identified are necessarily the best available for the purpose. Any data provided on this site is for illustrative purposes only, and does not imply a validation of results by NIST. By selecting external links, you will be leaving NIST webspace. Links to other websites are provided because they may have information that would be of interest to you. No inferences should be drawn on account of other sites being referenced, or not, from this page. There may be other websites that are more appropriate for your purpose.